Correct use of laser welding machine

Laser Welding Machine is a new type of welding method, because the electric welding speed of laser welding equipment is faster and convenient to use, and the non-contact electric welding is selected, which is convenient and flexible in actual operation, and has received unanimous five-star praise from consumers. Laser welding machine manufacturers tell you the proper operation method of laser welding equipment.

Analysis of common problems in the safe and reasonable application of laser welding equipment:

1. Preparations before the application of laser welding equipment

Check whether the switching power supply and water circulation system of the laser welding equipment are normal; whether the gas connection of the equipment in the equipment is normal; whether there is dust or oil stains on the surface.

2. Laser welding equipment on/standby

Start the laser welding equipment: connect the switching power supply, turn on the main power switch; turn on the chiller, laser generator, etc. in sequence; turn on the gate valve of the argon gas cylinder, adjust the total flow of powerful gas; enter the main operating parameters to be implemented today; Electric welding and welding in practice.

Laser welding equipment standby: withdraw from the program flow, turn off the laser generator; turn off the dust collector equipment, chillers and other machinery and equipment in sequence; turn off the gate valve of the argon bottle; turn off the main power switch.

3. Common problems in the safety application of laser welding equipment

When the laser welding equipment is working, if it encounters an emergency situation (such as water seepage, abnormal sound of the laser generator, etc.), it is necessary to press the direction change immediately and quickly disconnect the switching power supply; be sure to turn on the external cooling circulating water of the laser welding before operation. switch. Because the laser generator system software adopts the cooling water method, and the laser generator adopts the air cooling method, if the refrigeration system is abnormal, it is forbidden to start the work.

The laser welding machine manufacturer also reminds everyone here: when the laser welding equipment is working, its power supply circuit is in high voltage and strong current flow. It is forbidden to touch the power circuit electronic devices in the equipment during the operation of the equipment, without learning and training work. Personnel are strictly prohibited from actually operating this equipment.