What should be paid attention to when installing the laser marking machine

With the maturity of laser technology, Laser Marking Machine has appeared in the market. Compared with traditional marking equipment, it is not only easier to use, but also has better effect, lower cost, high precision, and has been recognized by customers for its excellent performance. It only takes a few simple steps to complete the marking, which is convenient and flexible, and is widely used in various industries. However, if you want to use the laser marking machine better, there are many places that need to be paid attention to during installation.

What should be paid attention to when installing and using laser marking machine?

1. Before assembling the laser marking machine, keep the equipment as clean as possible; keep the optical instruments in the dry clean room at 10°C to 35°C. It is usually necessary to ensure a separate and closed production workshop, to ensure room temperature, the wooden floor to be painted or tiled, and to be air-conditioned.

2. The customer should ensure the application of the main switching power supply, the minimum 2500 watt single-phase asynchronous motor power source, and the laser marking machine must be assembled in the air switch and maintenance of the main switching power supply; it is forbidden to use the triangle power plug.

3. The main switching power supply given by the customer needs a grounding device, and it is forbidden to connect it.

4. Use the deionized water circulation system storage tank to cool the circulating water. If deionized water is not available, pure water can be used instead. After the circulating system cooling circulating water has been used for a period of time, it should be replaced immediately (at least two weeks of water) to prevent affecting the high efficiency of the laser generator.

5. Assemble the rear baffle of the electronic optical console and the bright red display light of semiconductor materials. Since the laser is invisible to the human eye, the bright red laser is used as the reference for the loop. The red light must be in the same direction as the laser, so it is stipulated that the loop of the red light is parallel to the electron optical console, and the relative height is the same as the core height of the YAG rod.

6. Fixed the front clapboard of the laser marking machine: Assemble the front clapboard and adjust so that the red light just passes through the right center of the light exit hole of the clapboard to shoot out.

In order to obtain a better effect of the laser marking machine in use, there are many places that need to be paid attention to during installation, and it is necessary to choose a good manufacturer to buy, the purchased laser marking machine is guaranteed, and professional professional The installation method and the perfect after-sales service in the later period, Feiquan Laser Technology Wuxi Co., Ltd. is a laser marking machine manufacturer, so it is very worthwhile to choose.