Laser cutter protective lens cleaning and maintenance

   There are various types of maintenance spectacle lenses in the sales market, and the quality is also varied. If the camera lens is not selected properly, it will cause a large amount of laser wear and tear, the camera lens will be damaged frequently, and the product quality will be unstable, resulting in heavy losses to the company. Therefore, choosing a suitable maintenance lens is a very critical problem.

   Although the maintenance spectacle lenses of the Laser Cutting Machine belong to the spare parts, in order to better improve its utilization rate and reduce the product cost, the laser cutting machine manufacturers can perform cleaning and maintenance of the spectacle lenses according to the timing to complete the purpose of repeated use.

How to clean the maintenance glasses?

1.The raw materials of the maintenance glasses are relatively brittle and are afraid of falling; pay attention when disassembling: do not use excessive force, and do not collide with hard blocks.

2.2. There is an anti-reflection film on the surface, which is afraid of environmental pollution, wet and cold, greasy feeling, and scratches. Therefore, it is necessary to produce dry and degreasing gas during work. Do not use a laser cutting machine to immediately solve the camera lens, because the vegetable oil on the skin will affect the camera lens. The surface layer of the camera lens causes a lot of damage. In turn, you can use the unique equipment of rubber gloves and rubber gloves for practical operation, for smaller lenses, optical tweezers or vacuum pump tweezers are more convenient.

3.3. Under normal circumstances, the condition of the laser cutting machine to maintain the spectacle lenses must be checked before application and before and after cleaning. Because the specifications of most air pollutants and surface defects are relatively small, we often have to check spectacle lenses. In addition to the large-scale machinery and equipment, sometimes we have to use brighter light to direct the electron-optical surface to improve the total reflection compressive strength of surface air pollutants and defects, so that the air can be tested more easily. Contaminants and Disadvantages.

4.4. When cleaning the laser cutting machine to maintain spectacle lenses, clean wipes and electro-optical grade organic solvents are often used to avoid the damage of other air pollutants. The wiping cloth must be moistened with a suitable organic solvent, and should not be applied dryly. The flexibility should be fully considered. The wiping cloth that can be used is a cotton mesh wiping cloth or a wiper such as cotton, cleaning cloth, and cotton ball.