Laser marking machine manufacturers teach you how to use it correctly

   With the rapid development of society and the continuous updating of technologies in various industries, more and more equipment has appeared in industrial production, such as laser marking machines, which are more and more widely used, and can use laser beams to print marks on different materials. However, the Laser Marking Machine also has certain methods and processes when it is operated, so that it can operate normally. The following laser marking machine manufacturers will teach you how to use the laser marking machine correctly.

How to apply the laser marking machine correctly

1. The machinery and equipment are applied by professionals and maintained by full-time personnel.

2. The operator must be able to complete the actual operation after learning and training the full-time personnel of the machinery and equipment factory to meet the standards.

3. The manufacturer of the laser marking machine reminds the operator that the actual operation must be completed in accordance with the instructions to prevent damage to the equipment or even accidental injury due to operational errors.

4. The laser marking machine should do a good job of cleaning the machinery and equipment before handing over or leaving get off work every day, and oil and maintain the movable components of the machinery and equipment (such as slide rails, needle sleeves, etc.), and observe whether the engine has screws. Falling off and other conditions, everything is intact before work can be handed over or off work.

5. Follow the general laser marking machine safety safety operation rules. Operate the fiber laser marking machine strictly according to the operation procedure of the fiber laser generator.

6. After the laser marking machine is turned on, the CNC lathe should be started in the X.Y position of the manual low-speed gear to check whether there is any abnormality.

7. The manufacturer of the laser marking machine recommends that when the machine and equipment are started, the actual operating staff cannot leave their jobs at will or find someone to take care of them. If they really need to leave, they need to shut down or cut off the main power switch.

8. Follow high pressure safety regulations when repairing. Every 40 hours of operation or weekly maintenance. Every 1000 hours of operation or every six months, depending on the requirements and application.

9. It is required to wear protective equipment for work, and must wear standard goggles around the optical fiber laser.

10. Put the fire extinguisher in an area within easy reach; turn off the fiber laser generator or gate when not in production; do not place printing paper, cloth or other flammable objects around the fiber laser without safety protection.

11. Maintain the fiber laser generator. The bed and surrounding places are clean and tidy. Orderly.

Laser marking machine is a highly specialized equipment. If it is not operated normally, it will fail. Therefore, novices must be trained by professional laser marking machine manufacturers to operate independently. Feiquan Laser Technology Wuxi Co., Ltd. based on experience Several details of the safety work of laser marking machines are summarized, and more professional training can be obtained by purchasing laser marking machines in this company, so that people can use them with confidence.