What should be paid attention to in the maintenance of laser cutting machine?

Feiquan Laser Technology Wuxi Co., Ltd.'s Xiaochuang classroom teaching has started again! Today we are talking about how to maintain the fiber laser cutting in the Laser Cutting Machine brand?

At this stage, many manufacturers in the sales market want to spend a lot of money on fiber laser cutting, but how to carry out maintenance after buying it has become a problem that manufacturers care about. Today, we will introduce these common and reasonable maintenance methods for fiber laser cutting in detail.

1. Centrifugal fan cleaning is inevitable

The long-term application of the centrifugal fan in the equipment will cause a lot of solid dust to accumulate inside the centrifugal fan and the air duct, which will cause the centrifugal fan to make a lot of noise, and it is also unfavorable for dust removal and deodorization.

Maintenance method: Loosen the connecting hose hoop between the exhaust pipe and the centrifugal fan, remove the exhaust pipe, and remove the dust in the exhaust pipe and the centrifugal fan.

Maintenance cycle time: once a month

2. The cleaning of the chiller should be performed regularly

The water body of calcium and magnesium ions in the water storage tank of the chiller must be checked before the equipment is in operation. The water body and temperature of the cooling circulating water will immediately endanger the service life of the laser generator.

Maintenance method: regularly replace the cooling circulating water and clean the water storage tank.

Maintenance cycle time: once every half a year or dismantling and replacing before long-term use of machinery and equipment

3. Glasses are cleaned day and night

Equipped with reflective lenses and lenses. The laser is then sent out from the laser cutting head according to the rear focus point or the immediate focus point on the reflective surface of this spectacle lens. Spectacle lenses are very susceptible to air pollutants such as dust, which can cause wear of the laser or damage to the spectacle lenses.

Maintenance method: Check the reflective lens every two months, and check the maintenance spectacle lens or condenser before going to work every day. Absolute ethanol, gently scrub in the same direction, and replace it immediately if it is damaged.

Maintenance cycle time: maintenance mirror or condenser mirror once a day in the morning, noon and evening, and reflector mirror once every two months.

4.Screws and couplings need to be tightened

After the endocrine system is working for a period of time, the screws and couplings at the joints of the fitness exercise are very easy to loosen, which will endanger the stability of molecular thermal motion. Therefore, when the equipment is running, it is necessary to observe the transmission system components for wood and noise. If there is any abnormal situation, if there is a problem, you should immediately contact the manufacturer to carry out adjustment and maintenance.

Maintenance method: communicate with the manufacturer on time about the condition and maintenance of the machinery and equipment.

Maintenance cycle time: once a month

Five, the slide rail cleaning can not be less

As one of the key components of machinery and equipment, slide rails and racks and pinions are used to guide or support. During the whole process of the operation of the machinery and equipment, a lot of smoke and smoke will be generated during the production and processing of the parts. Production and processing precision.

Maintenance method: First, use a non-proof cloth to wipe off the original grease and smoke on the slide rail. After cleaning, wipe the grease on the slide rail and gear rack for maintenance.

Maintenance cycle time: once a week

6. The laser light path needs to be checked before taking up the post

The laser optical path system software of fiber laser cutting is composed of reflective mirrors and mirrors that cooperate with each other to focus or only use mirrors to focus. All mirrors and mirrors are mechanically fixed, and there is a probability of deviation, which generally does not work. It is not easy to produce deviation under the condition of medium, and vibration will cause slight deviation during fitness exercise, so it must be maintained regularly.

Maintenance method: Before the customer works every day, check the coaxial output of the optical nozzle to determine whether the laser light path is normal.

Maintenance cycle time: the coaxial output of the optical nozzle is once a day on average, and the inner laser light path is once every six months.