How do laser marking machine manufacturers prevent condensation on medium/high power lasers in summer?

In summer, in the environment of high temperature and high humidity, we must pay attention to prevent condensation on the laser. When the laser cooling water temperature is set lower than the corresponding dew point temperature, condensation will occur.

Therefore, the Laser Marking Machine manufacturer needs to set the cooling water temperature according to the actual temperature and humidity environment of the site (cabinet) to ensure that the temperature of the laser cooling water is set higher than the corresponding dew point temperature. At the same time, it meets the water temperature requirements of the laser (body temperature: 21-25℃) and cooling requirements, otherwise, the laser may cause a high temperature alarm.

For the different areas on the above, the actions that need to be taken are as follows:

1. The laser must ensure that all parts of the chassis are well sealed.

2. For lasers manufactured in 2013 and later, each time the machine is turned on and off, it needs to be operated in the following order.

3. The ideal operating environment of the laser is a temperature of 10~25 degrees and a humidity of less than 50%, that is, it is best to be in an air-conditioned room that is isolated from the water cooler and is turned on all day.

Only with proper and careful maintenance, the fiber laser marking machine can have a longer working life.