How to solve the problem of brand error of laser cutting machine

Using a Laser Cutting Machine for a long time for sheet metal processing will inevitably lead to a decrease in accuracy and an increase in errors, resulting in a decrease in the qualified rate of cutting products, which is not conducive to the production of enterprises. So how should the machine be adjusted when errors occur? The following will analyze the following points.

1. The thickness of the cutting material exceeds the standard. Generally, the thickness of the sheet metal laser cutting machine can cut is less than 12 thicknesses. The thinner the sheet, the easier it is to cut and the better the quality. If the plate is too thick, the laser cutting machine will be difficult to cut. In the case of ensuring the cutting, there will be errors in the processing accuracy, so the thickness factor of the plate should be determined.

2. The laser output power is not up to standard. When the laser cutting machine is running and debugging, it is necessary to ensure that the output power of the laser reaches the standard. Generally, the higher the output power of the laser, the better the cutting quality on the plate of the same thickness.3. The roughness of the cut sheet. In general, the smoother the surface of the cutting material, the better the cutting quality.

4. The focus position is inaccurate. If the focus of the laser cutting machine is not aligned, it will directly affect the cutting accuracy, so it should be calibrated and checked before running. You can also purchase the laser cutting machine brand auto-focusing laser head when purchasing the machine, auto-focusing, to ensure the cutting accuracy.

5. Processing speed. The cutting speed of the laser cutting machine directly affects the processing accuracy. Therefore, it is also necessary to achieve a good fit between the cutting speed and the material before running.